If you just plan on keeping ChromeOS on your Chromebook and not dual-booting or installing another OS, then you can just ignore the above and keep the screw attached. We recommend getting a ChromeOS and Linux dual-boot fully working first before trying this. If you remove the screw, you should be able to use the commands on the page here to effectively skip the developer screen at bootup.īe a little careful if you’re going to try this though, since there is some more risk involved. With the write-protect screw in place, you are still prevented from modifying or skipping the “Developer mode” screen at boot time. However, on the newer Broadwell chipset Chromebooks (Dell Chromebook 13 included), you don’t need to do this to get dual boot – instead, you can just install the “Legacy” bios by running the script on the johnlewis.ie ROM download page. In earlier Chromebooks, you would need to remove this to install an alternative BIOS – for example, if you wanted to dual-boot into Linux as well as ChromeOS. This should be the Chromebook BIOS write-protect screw. Step 5 – * Optional * – Remove the BIOS write-protect screwĪt the top-right of the board, there is a screw with the letter “WP” written beside it. We didn’t remove the battery in this example, however we’re not responsible for any damage that might happen in this case.! It’s probably not entirely necessary to do this for the purpose of replacing the SSD drive, as long as you’re not poking around too much in the innards of the Chromebook. You might also notice a warning on the battery – “Please disconnect and remove battery before accessing device”. Simply unscrew this and pull out the card. The drive is kept in place with a single screw. Now that the back cover is off, you should be able to see the old SSD drive at the top right, just above the WiFi card (see marked image below). In the image below, we used a little plastic card to gradually separate the back cover from the rest of the Chromebook, starting at the top-left corner and working towards the right.Īfter some time, you should be able to easily lift off the entire cover. ![]() You’ll need a thin piece of plastic card or something similar to help with physically removing the cover. There are no cables or other attachments connecting the cover with the rest of the body – it’s simply pushed into place. Step 3 – Lever open and remove the bottom cover A small credit-card thickness piece of plastic to lever open the caseīefore coming into contact with any exposed electronic parts, ensure that your Chromebook is detached from the power supply, and that you’re not carrying a static electric charge.A couple of Phillips-style screwdrivers.A 4GB or larger USB stick or SD card to act as a ChromeOS recovery disk.Some people had also previously reported firmware problems with the power-saving feature on Transcend drives, however this no longer appears to be an issue with current versions of these drives.įor this example, we’ve used a 64GB Transcend SSD. MyDigital had some issues with drives failing some time ago, however this appears to be less of a concern now. Transcend, ZTC and MyDigital are popular brands. ![]() Here’s what you’ll need for this upgrade:Īny of these SSD drives should work fine (42mm M.2 NGFF). ![]() ![]() (Click on the images for hi-res versions) Before you start Replacing the built-in storage on the Dell Chromebook 13 is straightforward – here we’ll show you the exact steps needed. This is fine for most online usage, however sometimes you may want increased offline storage space for music or video collections, or especially if you’re running native Linux apps or games on your Chromebook. But like almost all other Chromebooks, local storage space is limited to either a 16GB or 32GB SSD storage option.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |